Water taps

"

We have water taps for caravans, motorhomes, and boats. Everything from kitchen taps, bathroom taps, shower taps, etc. To replace an old water tap for a caravan or to buy a new water tap for a motorhome, one needs to investigate a bit first to find the exact tap that fits.

Since the threads on the taps have different dimensions, it is important to measure the correct hole dimension where the tap will be installed. There are different tap connections for each water system in the vehicle. Hose nipple connection is the most common where the soft water hose is pulled onto the tap's nipple and then sealed with a hose clamp. If the tap has a John Guest connection, you can easily connect the hard plastic water hose to the JG connection by inserting the water hose inside the connection, which is then secured with clips. The rapid connection has a metal thread where the end of the water hose for connection to the tap's rapid connection has a corresponding thread with a tightening nut. Uniquick connections are very common where the tap has hard plastic hoses attached to it. To connect them with incoming water hoses that are made of hard plastic, uniquick coupling connectors are needed. Water taps that have a brass quick connection also have a uniquick solution where you attach a uniquick connector to the nipple and then insert the hard water hose into the connector. Uniquick connectors have small clips that secure the hose or connection from the tap.
When you want to insert the hose, you open the uniquick connector with a small latch so that the clips retract, then you insert the hose; when the hose is in the correct position, you release the latch so that the clips grip onto the water hose/tap's connection hose.

All of our taps have a micro switch, electrical cables, and are for 12V.

"