The tent is 330 cm wide and 250 cm deep, with height adjustment between 235–250 cm. Doors are located at the gables, all windows have blackout curtains, and the front can be rolled up. Thanks to the double keder rails, the tent fits all types of motorhome awnings.
- Material: Polyester 210D Oxford
- Packed dimensions: 78 × 32 × 32 cm
- Weight: 14 kg
- Roll-up front
- Doors in both gables
- Includes: Awning, storm straps, extra air tube in the middle (not used on vans), poles to hold up the front as entrance
We recommend purchasing pressure poles for sealing against the vehicle, sold separately.
A practical and flexible inflatable tent that combines fast setup with high functionality for all types of vehicles.
Installation
This tent can be mounted on both caravan rails and motorhome awnings.
Caravan:
For caravan mounting, a straight section of the rail is required that is as wide as the tent. If a tent side covers a window, it is not a problem, as the sides can be sealed with pressure poles (accessory).
Motorhome / Van:
The tent requires an awning box at least as wide as the tent. To ensure correct height, measure the distance from the underside of the awning box to the ground, preferably both front and rear. If your awning box has a height between 235–250 cm and a width of 330 cm or more, the tent fits perfectly.
This tent is especially suitable for panel vans. With a width of 330 cm, it covers the sliding door, and the tent has no air tubes that interfere with the sliding door, allowing it to be used without obstruction when the tent is installed – something that otherwise would not work.
The reason this applies to panel vans but not motorhomes is that the awning and sliding door on panel vans are very close together. On a motorhome, there is no sliding door, so the air tubes extending a few centimeters do not matter.
Denmark
Finland
Sweden
Norway
Estonia
Latvia
Lithuania
Poland
Germany
Netherlands
Belgium
France
Spain
Portugal
Czechia
Slovakia
Austria
Slovenia
Italy
Croatia
Luxembourg