Estate is made from SolTex, developed specifically for long-term seasonal use. The weatherproof coated roof withstands water, UV radiation, mold, and stains, while the breathable wall panels made of acrylic help reduce condensation and mold. The seams are sewn with a water-reactive thread that swells when wet and helps to seal the seams naturally.
Adjustable height
Telta Estate 390 fits caravans and motorhomes with a connection height between 235 and 280 cm. The smart height system allows you to adjust the tent's sidewalls both inside and outside in increments of 15 cm.
Closed zippers: 235 to 250 cm
1 open zipper: 250 to 265 cm
2 open zippers: 265 to 280 cm
The large window sections create a bright and spacious feeling. Removable exterior window coverings provide the option for extra privacy and protection when needed. The result is a robust and comfortable air awning for those who wish to stay deployed for longer periods while also enjoying the convenient setup of a modern air tent.
Product features
- Developed for long-term seasonal use
- Air frame with inflation from a common point
- Adjustable connection height from 235 to 280 cm
- Weatherproof roof that withstands water, UV radiation, mold, and stains
- Breathable wall panels that help reduce condensation and mold
- Water-reactive thread that helps seal the seams when wet
- Large window sections for a bright and spacious feeling
- Removable exterior window coverings
- Double keder strips, suitable for caravans, motorhomes, and high campervans
This includes
Tent, caravan skirt, hand pump, ground anchoring, curtains, mounting manual, and carry bag.
Installation
Telta Estate 390 can be installed both in the tent rail of the caravan and in the box awning of the motorhome.
Caravan: For installation on the caravan, a straight part of the tent rail that is at least as wide as the tent is required. It doesn't matter if the tent's side wall overlaps a window as the sides are sealed against the caravan using pressure poles.
Motorhome: For installation on the motorhome, a box awning that is at least as wide as the tent is required. To find the correct connection height, measure from the bottom of the box awning down to the ground. It’s advisable to measure both the front and rear edges of the awning box. If the measurement falls between two height intervals, the higher variant is recommended.
